High Input Voltage, 3A Single Cell Battery Charger with NVDC Power Path Management,Replace BQ25601D
FEATURES

 High Efficiency, 1.5MHz, Synchronous Buck Charger

  93.8% Charge Efficiency at 1.02A from 5V Input

  89.8% Charge Efficiency at 2A from 9V Input

  Optimized for 9V/12V Input

  Selectable PFM Mode for Light Load Efficiency

 USB On-The-Go (OTG) Support (Boost Mode)

  Boost Converter with up to 1.2A Output

  Boost Efficiency of 93.5% at 0.5A and 92.2% at 1A

  Accurate Hiccup Mode Over-Current Protection

  Soft-Start Capable with up to 500μF Capacitive Load

  Output Short Circuit Protection

  Selectable PFM Mode for Light Load Operations

 Single Input for USB or High Voltage Adapters

  3.9V to 13.5V Operating Input Voltage Range

  22V Absolute Maximum Input Voltage Rating

  Programmable Input Current Limit and Dynamic 

  Power Management (IINDPM, 100mA to 3.2A 

  with 100mA Resolution) to Support USB 2.0 

  and USB 3.0 Standards and High Voltage Adaptors

  Maximum Power Tracking by Programmable 

  Input Voltage Limit (VINDPM) with Selectable Offset

  VINDPM Tracking of Battery Voltage

  Auto Detect USB BC1.2, SDP, CDP, DCP and

  Non-Standard Adaptors

  High Battery Discharge Efficiency with 26mΩ Switch

 Narrow Voltage DC (NVDC) Power Path Management

  Instant-On with No or Highly Depleted Battery

  Ideal Diode Operation in Battery Supplement Mode

 Ship Mode, Wake-Up and Full System 

  Reset Capability by Battery FET Control

 Flexible Autonomous and I2C Operation 

  Modes for Optimal System Performance

 Fully Integrated Switches, Current Sense and Compensation

 2.5μA Ship Mode Low Battery Leakage Current

 High Accuracy

  ±0.5% Charge Voltage Regulation (8mV/Step)

  ±5% Charge Current Regulation at 1.5A

  ±5% Charge Current Regulation at 0.4A

  ±20% Charge Current Regulation at 10mA

  ±10% Input Current Regulation at 0.9A

 SafetyBattery Temperature Sensing (Charge/Boost Modes)

  Thermal Regulation and Thermal Shutdown

  Input Under-Voltage Lockout (UVLO)

  Input Over-Voltage (ACOV) Protection


PIN CONFIGUTION
CROSS
BQ25601D BQ25601D.pdf

No.13774

FEATURES

 High-efficiency, 1.5-MHz, synchronous 

  switch-mode buck charger

  92% Charge efficiency at 2 A from 5-V input

  Optimized for USB voltage input (5 V)

  Selectable low power Pulse Frequency 

  Modulation (PFM) Mode for light load operations

 Supports USB On-The-Go (OTG)

  Boost converter with up to 1.2-A output

  92% Boost efficiency at 1-A output

  Accurate Constant Current (CC) limit

  Soft-start up to 500-µF capacitive load

  Output short circuit protection

  Selectable low power PFM 

  Mode for light load operations

  Single input to support USB input 

  and high voltage adapters

  Support 3.9-V to 13.5-V input voltage 

  range with 22-V absolute maximum input voltage rating

  Programmable input current limit (100 mA to 

  3.2 a with 100-mA Resolution) to support 

  USB 2.0, USB 3.0 standards and 

  high voltage adaptors (IINDPM)

  Maximum power tracking by input 

  voltage limit up to 5.4 V (VINDPM)

  VINDPM Threshold automatically tracks batteryvoltage

   Auto detect USB BC1.2, SDP, CDP, DCP and

  non-standard adaptors

 High battery discharge efficiency with 

  19.5-mΩ battery discharge MOSFET

 Narrow VDC (NVDC) power path management

  Instant-on works with no battery or deeply discharged batter

  Ideal diode operation in Battery Supplement Mode

 BATFET Control to support ship mode, 

  wake up and full system reset

 Flexible autonomous and I2C Mode 

  for optimal system performance

 High integration includes all 

  MOSFETs, current sensing and loop compensation

 17-µA Low battery leakage current

 High accuracy

  ±0.5% Charge voltage regulation

  ±5% at 1.5-A Charge current regulation

  ±10% at 0.9-A Input current regulation

 Safety-Related Certifications:

  TUV IEC 62368 Certification

PIN CONFIGUTION
Site Map