I2C Narrow VDC Buck Boost Battery Charge Controller With System Power Monitor,P2P SC8886.
FEATURES

• 1- to 4-Cell Charging from a Variety of Input Types

• 3.58V to 24V Input Operating Voltage Range

• USB 2.0/3.0/3.1 (Type C)/USB-PD Input Current Support

• Seamless Buck ↔ Buck-Boost ↔ Boost Transitions

• Input Overload Protection (IDPM and VDPM Regulation)

• CPU Throttling, Power and Current Monitoring

• Full nPROCHOT Profile IMVP8/IMVP9 Compliant

• Input Current Monitoring

• Battery Charge/Discharge Current Monitoring

• System Power Monitoring, IMVP8/IMVP9 Compliant

• Narrw Voltage DC (NVDC) Power Path Management

• Instant-On with Depleted or No Battery

• Battery Supplementation if Adapter is Fully Loaded

• BATFET Ideal Diode Emulation in Supplement Mode

• Power-Up USB Port from Battery (USB OTG)

• 3V to 20.56V Adjustable OTG Voltage with 8mV Resolution

• Up to 6.35A Output Current Limit with 50mA Resolution

• Pass Through Mode (PTM) to Improve Efficiency

• VMIN Active Protection (VAP) Mode

• VAP Supplements Battery from Input 

  Caps for System Power Spikes (Battery-Only Conditions)

• Input Current Optimizer Maximizes Power Extraction

• 800kHz or 1.2MHz Selectable Switching Frequency

• 2C Interface for Flexible System Configuration

• Input Current Limit Setting Pin (without I2C)




PIN CONFIGUTION
CROSS
SC8886 SC8886.pdf

No.13781

FEATURES

• Wide input range: 3.5V to 24V, 29V sustainable

• High efficiency Buck-Boost conversion

• Buck-Boost battery charger for 1 to 4 cell batteries

• Charging management including precharge, 

  fast charge, constant voltage charge, auto-wake up

• Reverse discharging mode, output voltage range: 

  3V to 20.8V with 8 mV resolution, comply 

  with USB PD 3.0 standards

• NVDC PowerPath management and 

  dynamic power management

• I2C interface

• Input current limit set by external resistor 

  and internal register

• Switching frequency: 800kHz /1.2MHz

• Integrated PSYS/IADPT/IBAT pin for power and 

  current monitor, compliant with Intel IMVP8/9 standard

• Integrated processor hot indication(/PROCHOT) pin

• Pass through mode (PTM)

• Integrated VMIN active protection (VAP) to 

  supplement system peak power when only battery exists

• 2-Level input current limit for CPU peak power

• Input current optimizer (ICO) algorithm for 

  maximum adapter power capacity

• Learn mode and ship mode for 

  Integrated independent comparator for 

  system voltage monitoring

• Protection including UVP, OVP, OCP, SCP, OTP

• QFN-32 Package

PIN CONFIGUTION
Site Map