BL24C04F.pdf• Compatible with all I²C bidirectional data transfer protocol
• Memory array:
4 Kbits (512bytes) of EEPROM
Page size: 16 bytes
• Single supply voltage and high speed:
1MHZ
Random and sequential Read modes
• Write:
Byte Write within 3 ms
Page Write within 3 ms
Partial Page Writes Allowed
• Write Protect Pin for Hardware Data Protection
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• High-reliability
Endurance: 1 Million Write Cycles
Data Retention: 100 Years
• Enhanced ESD/Latch-up protection
HBM 6000V
• 8-lead PDIP/SOP/TSSOP/ UDFN and TSOT23- 5packages
• 1million erase/write cycles with 40 years data retention
• Single supply voltage:
3V to 5.5V for ST24x04 versions
2.5V to 5.5V for ST25x04 versions
• Hardware write control versions: st24w04 and st25w04
• Programmable write protection
• Two wire serial interface, fully i2c bus compatible
• Byte and multibyte write (up to 4 bytes)
• Page write (up to 8 bytes)
• Byte, random and sequential read modes
• Self timed programming cycle
• Automatic address incrementing
• Enhanced esd/latch up performances
