SCT2A10.pdf• Wide Input Range: 4.5V-100V
• 0.6A Continuous Output Current
• 0.8V ±1% Feedback Reference Voltage
• Integrated 770mΩ High-Side and 460mΩ LowSide Power MOSFETs
• Pulse Frequency Modulation (PFM) with 100uA
– Quiescent Current in Sleep Mode
• 4ms Internal Soft-start Time
• Adjustable Frequency 300KHz to 800KHz
• Precision Enable Threshold for Programmable
– Input Voltage Under-voltage Lock Out Protection
– (UVLO) Threshold and Hysteresis
• Cycle-by-Cycle Current Limiting
• Over-Voltage Protection
• Over-Temperature Protection
• Available in an ESOP-8 Package
• Designed for Reliable and Rugged Applications
– Wide Input Voltage Range of 6 V to 100 V
– Junction Temperature Range: –40°C to 150°C
– Fixed 3-ms Internal Soft-Start Timer
– Peak and Valley Current Limit Protection
– Input UVLO and Thermal Shutdown Protection
• Suited for Scalable Industrial Power Supplies and
Battery Packs
– Low Minimum On- and Off-Times of 50 ns
– Adjustable Switching Frequency up to 1 MHz
– Diode Emulation for High Light-Load Efficiency
– 10-µA No-Load Input Quiescent Current
– 3-µA Shutdown Quiescent Current
– Optimized for CISPR 32 EMI Standard
• Integration Reduces Solution Size and Cost
– COT Mode Control Architecture
– Integrated 0.7-Ω NFET Buck Switch Supports
Wide Duty-Cycle Range
– Integrated 0.3-Ω NFET Synchronous Rectifier
Eliminates External Schottky Diode
– 1.2-V ±1% Internal Voltage Reference
– No Loop Compensation Components
– Internal VCC Bias Regulator and Boot Diode
– Open-Drain Power Good Indicator
– 8-Pin SOIC Package With PowerPAD
• Create a Custom Design Using WEBENCH
Power Designer
