High Input Voltage, 3.78A Single Cell Battery Charger with NVDC Power Path Management,Replace BQ25890H
FEATURES

 Flexible Autonomous and I2C Operation 

  Modes for Optimal System Performance

 Fully Integrated Switches, Current Sense and Compensation

 External Direct Charging Path Enable Output

 8μA Ship Mode Low Battery Leakage Current

 High Accuracy

  ±0.5% Charge Voltage Regulation (8mV/Step)

  ±5% Charge Current Regulation at 1.5A

  ±10% Input Current Regulation at 0.9A

 Safety

  Battery Temperature Sensing (Charge/Boost Modes)

  Thermal Regulation and Thermal Shutdown

  Input Under-Voltage Lockout (UVLO)

  Input Over-Voltage (ACOV) Protection
































PIN CONFIGUTION
CROSS
BQ25890H BQ25890H.pdf

No.13777

FEATURES

 High Efficiency 5-A, 1.5-MHz Switch Mode Buck Charge

  93% Charge Efficiency at 2 

  A and 91% Charge Efficiency at 3 A Charge Current

  Optimize for High Voltage Input (9 V / 12 V)

  Low Power PFM mode for Light Load Operations

  Selectable 500-KHz / 1.5-MHz Boost 

  Converter with up-to 2.4 A Output

  93% Boost Efficiency at 5 V at 1 A Output

  Accurate Hiccup Mode Overcurent Protection

  Support down-to 2.5V Battery

  Support PWM only or Light Load Efficiency

  Support 3.9-V to 14-V Input Voltage Range

  Input Current Limit (100 mA to 3.25 A with 

  50-mA resolution) to Support USB2.0, USB3.0 

  standard and High Voltage Adapters

  Maximum Power Tracking by Input 

  Voltage Limit up-to 14V for Wide Range of Adapters

  Auto Detect USB SDP, CDP, DCP, and 

  Non-standard Adapters

  Input Current Optimizer (ICO) to 

  Maximize Input Power without Overloading Adapters

  Resistance Compensation (IRCOMP) 

  from Charger Output to Cell Terminal

  Highest Battery Discharge Efficiency with 11-mΩ

  Battery Discharge MOSFET up to 9 A

  Integrated ADC for System Monitor

  (Voltage, Temperature, Charge Current)

 Narrow VDC (NVDC) Power Path Management

  Instant-on Works with No Battery 

  or Deeply Discharged Battery

  Ideal Diode Operation in Battery Supplement

 BATFET Control to Support Ship 

  Mode, Wake Up, and Full System Reset

 Flexible Autonomous and I2C Mode for 

  Optimal System Performance

 High Integration includes all MOSFETs, Current

 12-µA Low Battery Leakage Current to 

  Support Ship Mode

 High Accuracy

  ±0.5% Charge Voltage Regulation

  ±5% Charge Current Regulation

  ±7.5% Input Current Regulation

 Safety

  Battery Temperature Sensing for Charge and Boost Mode

  Thermal Regulation and Thermal Shutdown

PIN CONFIGUTION
Site Map